The first bisque firing
Slow is the whole trick: most cracked pots in a first firing were simply heated too fast.
A bisque firing turns dry clay into something that can be glazed without falling apart. It sounds simple, and it mostly is, as long as the kiln climbs slowly through the first few hundred degrees.
Water that you cannot see is still in the clay. Below the boiling point it leaves quietly; above it, if the pot is thick, it turns to steam inside the wall and pushes its way out. I now keep the first two hours under 100 °C an hour and leave the lid cracked open.
Pieces can touch and even stack in a bisque. Bowls rim to rim, small cups inside larger ones. The only rule I keep is not to stack anything heavy on a thin foot.
After the firing, the pots ring when tapped. A dull sound usually means a hairline crack, and it is better to find that now than after glazing.